Posts

Showing posts with the label 1 line

One Line Learning Posts - 3 BGP

 Today we will cover some confusing options of the BGP 1). Route Dampening is only working for eBGP routes. It will not trigger on iBGP route. This technique is applied when receiving updates from external peers only (EBGP). Applying this technique to IBGP learned routes or to advertisement to IBGP or EBGP peers after making a route selection can result in routing loops. 2).  Peer Group : Since IOS version 12 manual peer group configuration is no longer necessary to achieve this optimization. IOS is capable of recognizing neighbors with the same outbound policy. These are then grouped together automatically. This is a feature called Dynamic Update Peer Groups. You can check the Dynamic groups using the command "show IP bgp update-grou p" command.  Changing a policy in out direction to a neighbor will also change the update group in the backend.  3). Simplifying Route Reflector rule : Books say there are three rules. But as per my complete understanding of this...

One Line Learning Posts - 3 MPLS VPLS

  Kompella method, Pseudowire is signaling via BGP which is one of the methods (Juniper) Martina method , pseudowire is signaling via LDP which is a second method (Cisco). This is the default method on Cisco Boxes. It does not support Autodiscover.  When multihoming a VPLS site (potentially in different autonomous systems [ASs]), the PE routers connected to the same site can either be configured with the same VPLS edge (VE) device identifier or with different VE device identifiers. If you are using different VE device identifiers, you must run the Spanning Tree Protocol (STP) on the CE device, and possibly on the PE routers, to construct a loop-free VPLS topology. Two VPLS NLRIs are considered equivalent from a path selection perspective if the following are the same: Route distinguisher VE device identifier VE block offset (the default VE range of 10 is applied) If two PE routers are assigned the same VE device identifier in a given VPLS, they must also advertise the same ...

One Line Learning Posts - 2 BGP

 Today's topic is BGP: 1).  For Incoming traffic from the other AS to Local AS, BGP MED , AS-PATH Prepending , and Community Attributes can be used.  2.  BMP (BGP Monitoring Protocol) is an automated way of collecting BGP data from routers.  3).  BMP offers following Advantages as: Configure devices to function as BMP servers, and set up parameters on the servers, that are required for monitoring of the BGP neighbors. Establish connectivity of the BMP servers with BGP neighbors for monitoring. Generate statistics report from monitoring the BGP neighbors. Perform appropriate error handling on the BGP neighbors. Graceful scale up and degradation to the point of closing connectivity between the BMP servers and BGP neighbors. Read More about BMP :    

One Line Learning Posts - 1 MPLS

 A unique line posts are for your learning and notes. Will write down this type of post every day.  You can copy and paste it into your notes.  1). If you don't have Router Reflector in the MPLS networking and use full mesh connectivity, then you don't require Different RDs for installing two or more routes in the routing table.  2). Route Target (RT) is an extended community attribute used to import and exports VPN prefixes to and from VRFs.